|
Moduflex Type F Loading Bellow
|
images/products/materials_handling/loading_bellows/bellows_F300.jpg |
<p>A complete solution with built-in filter bags and fan. The cleaning of filters takes place automatically by means of compressed air from the air receiver. The dust from the filter will hereby follow the material during loading.</p>
<p>Applied for loading products with moderate wear and dust characteristics. The filter module is retractable and therefore only requires a minimal increase in build-in height. Other construction like type S.</p>
<p><strong>Options</strong></p>
<ul>
<li>Vibrator: Operated at the end of the loading cycle prior to raising the bellow.</li>
<li>Electrical Equipment: Wide range of electrical controls, indicators in outlet etc...</li>
<li>Disperser: Spreads the material for maximum utilization, when loading in tanker trucks.</li>
<li>Closing Cone (mechanical): For T-Outlet. Automatically blocks the outlet when the bellow feeder is not being used.</li>
<li>Closing Cone (electrical): Is applied combined with the TF-Outlet.</li>
</ul> |
Moduflex |
F300.pdf |
1 |
half_width |
Super User |
Hits: 0
|
|
Moduflex Type H Loading Bellow
|
images/products/materials_handling/loading_bellows/bellows_H300.jpg |
<p>Heavy duty bellow feeder for loading very dusty and abrasive products like cement, fly ash, etc. <br />Modular construction: Makes the replacement of modules quick and easy. Over lapping Internal guide cones gives better separation of material and exhaust air.</p>
<p>Can be supplied in mild steel or stainless steel. External connection rings in stainless steel c/w heavy duty wire guides in nylon.</p>
<p>Motor winch: The motor frame is reliable and easy to service/maintain with external 3 point wiring c/w indication of tight and slack wire.</p>
<p><strong>Options</strong></p>
<ul>
<li>T-Outlet: For loading in tanker truck. Can be supplied with rubber covering on the outer surface.</li>
<li>F-Outlet: Complete with dust skirt for open loading.</li>
<li>TF-Outlet: Combination of T and F outlet. Can be equipped with electrical raising and lowering of skirt.</li>
<li>Hand winch: Inlet or wall mounted types available.</li>
<li>Vibrator: Operated at the end of the loading cycle prior to raising the bellow.</li>
<li>Electrical Equipment: Wide range of electrical controls, indicators in outlet etc...</li>
<li>Disperser: Spreads the material for maximum utilization, when loading in tanker trucks.</li>
<li>Closing Cone (mechanical): For T-Outlet. Automatically blocks the outlet when the bellow feeder is not being used.</li>
<li>Closing Cone (electrical): Is applied combined with the TF-Outlet.</li>
</ul> |
Moduflex |
H300.pdf |
1 |
half_width |
Super User |
Hits: 0
|
|
Moduflex Type S Loading Bellow
|
images/products/materials_handling/loading_bellows/bellows_S300.jpg |
<p>For loading granulates, grain, sugar, flour and similar products with moderate wear and dust characteristics.</p>
<p>Modular construction: Makes the replacement of modules quick and easy. Internal wear cones in different materials. External connection rings in stainless steel c/w heavy duty wire guides in nylon.</p>
<p>Motor winch: The motor frame is reliable and easy to service/maintain with external 3 point wiring c/w indication of tight and slack wire.</p>
<p><strong>Options</strong></p>
<ul>
<li>T-Outlet: For loading in tanker truck. Can be supplied with rubber covering on the outer surface.</li>
<li>F-Outlet: Complete with dust skirt for open loading.</li>
<li>TF-Outlet: Combination of T and F outlet. Can be equipped with electrical raising and lowering of skirt.</li>
<li>S500: F-Outlet c/w heavy duty dust skirt for loading in open truck, pile, ship or open warehouse.</li>
<li>Hand winch: Inlet or wall mounted types available.</li>
</ul> |
Moduflex |
S300.pdf |
1 |
half_width |
Super User |
Hits: 0
|
|
Mollet MOLOSmembran MFE-A
|
images/products/level_probes/mollet/levelprobe_mfea.png |
<p>The MFE-A is a level indicator for full, empty or demand detection of granulates and grain-shaped bulk goods with a maximum grain size of 30 mm. It is mainly used in silos, hoppers, or bins. This sensor with stainless steel membrane and aluminium housing is particularly suitable for the use in areas with dust and gas explosion hazard.</p> |
Mollet |
MF_Range.pdf |
1 |
half_width |
Super User |
Hits: 0
|
|
Mollet MOLOSpendu PF
|
images/products/level_probes/mollet/levelprobe_pf.png |
<p>The PF is a full indicator for powdery, granulated, and grainy bulk goods and preferred for mechanically filled silos and containers. The simple design enables a reliable and very price worth level indication.</p>
<p><strong>Product features</strong></p>
<ul>
<li>very good price-performance-ratio</li>
<li>use in dust and gas explosive hazardous areas possible</li>
<li>high reliability</li>
<li>maintenance-free continuous operation</li>
<li>easy installation</li>
<li>no supply voltage necessary</li>
<li>innovative protection against buckling</li>
</ul> |
Mollet |
PF_Range.pdf |
1 |
half_width |
Super User |
Hits: 0
|
|
Mollet MOLOSroto DF21
|
images/products/level_probes/mollet/levelprobe_df21.png |
<p>The rotary paddle level indicator DF21 is used in most bulk solids for full-, empty or demand-detection within silos and bins. The individual sensor configuration with a large number of options and a lot of accessories enables an accurate adaptation to any specific application.</p> |
Mollet |
DF_Range.pdf |
1 |
half_width |
Super User |
Hits: 0
|
|
Mollet MOLOSvibro VF12
|
images/products/level_probes/mollet/levelprobe_vf12.png |
<p>The VF12 is a level indicator for full, demand or empty detection in bins or silos for powdery, granulated and grained bulk goods up to a grain size of 10 mm. The very robust design allows a reliable level indication in a lot of applications.</p> |
Mollet |
VF_Range.pdf |
1 |
half_width |
Super User |
Hits: 0
|
|
Monitor KA and KAX
|
images/products/level_probes/monitor/KA-t.jpg |
<p>The Monitor KA and KAX range of rotary paddle bin monitors consist of some of the most reliable, rugged and economical point level control sensors available for detection of dry bulk materials. These easy to install units are proven performers in a wide variety of bulk materials.</p>
<p>They can be used to eliminate bin overflow, maintain a predetermined material level, indicate plugging of conveyors and pneumatic lines or provide any of a number of level control functions.</p>
<p>Unlike many other available paddle units, the Monitor range of paddle level indicators incorporate a feature that automatically shuts off the motor of the unit when the paddle is in a stalled position, which both extends the life of the motor and minimizes maintenance.</p>
<p>The KA model is the most popular for standard applications on a wide variety of materials. The KAX version is specially designed to meet hazardous area standards.</p>
<p><strong>Typical applications include:</strong></p>
<ul>
<li>Feed</li>
<li>Pellets</li>
<li>Rubber</li>
<li>Coal</li>
<li>Clays</li>
<li>Grain</li>
<li>Rawhide</li>
<li>Silica Sand</li>
<li>Wood</li>
<li>Metals</li>
<li>Peanuts</li>
</ul> |
|
|
1 |
half_width |
Super User |
Hits: 0
|
|
Monitor SafePoint
|
images/products/level_probes/monitor/SPoint-t.jpg |
<p>The SafePoint fail-safe bin monitor is the state-of-the-art in rotary paddle technology. Utilising patent-pending magnetic sensing technology and a new unique housing design, the SafePoint bin monitor is the most reliable, technician friendly, rugged and economical failsafe rotary paddle point level control sensor of its kind.</p>
<p>The SafePoint bin monitor provides the ultimate in performance wherever critical continuous operation must be ensured. Detection of both material presence and its own operational status is performed on a continuous basis. The SafePoint level sensor monitors its electrical and mechanical operating condition. Separate outputs are provided for material sense and unit status (fault conditions).</p>
<p><strong>Typical applications include:</strong></p>
<ul>
<li>Resin</li>
<li>Foundry Sand</li>
<li>Sawdust</li>
<li>Rocks</li>
<li>Calcium Dust</li>
<li>Regrind</li>
<li>Malt</li>
<li>Limestone</li>
<li>Ingredients</li>
<li>Cement</li>
<li>Feed</li>
</ul> |
|
|
1 |
half_width |
Super User |
Hits: 0
|
|
Monitor Tilt Switch
|
images/products/level_probes/monitor/tiltswitch.jpg |
<p>A tilt switch provides indication by detecting the angular position of the tilt switch enclosure. Typically the unit is suspended above the material to be sensed. Internally, a steel ball centres itself over a switch resulting in switch actuation. As rising material contacts the tilt switch (or the extension actuator) the enclosure begins to tilt. When the enclosure body is tilted at 17°, the steel ball rolls off centre, deactivating the switch.</p>
<p>As material falls away from the switch enclosure body (or the extension actuator) and the unit becomes upright, the ball returns to its original centred position, once again causing switch actuation. The change in the internal switch status is user accessible for signalling alarms, lights, or interfacing with a PLC.</p>
<p>Monitor's tilt switches can be used in a variety of applications and with many different types of materials. The TC-3X can be used with materials 15-60 lb/ft³, while the TC-1 can be used with materials 45+ lb/ft³.</p>
<p><strong>Typical applications include:</strong></p>
<ul>
<li>Feed</li>
<li>Pellets</li>
<li>Rubber</li>
<li>Silica sand</li>
<li>Wood</li>
<li>Metals</li>
<li>Malt</li>
<li>Limestone</li>
<li>Pre-mix</li>
<li>Regrind</li>
<li>Clays</li>
</ul> |
|
|
1 |
half_width |
Super User |
Hits: 0
|
|
Nohken R7z
|
images/products/level_probes/nohken/R7z.jpg |
<p>An extremely popular, low cost Rotary Paddle Level Probe.</p>
<p>When power is supplied to the R7z sensor a motor powers a revolving shaft to which a paddle is mounted. When the material level inside the container reaches the revolving paddle the rotation is halted and the motor rotates around the shaft and activates an isolated SPDT micro switch. This removes the power from the motor so that it stops rotating and an alarm signal is provided. When the material level falls below the paddle the motor resets and the micro switch restores the revolving action.</p>
<p><strong>Features</strong></p>
<ul>
<li>Available in 240VAC, 110VAC & 24VAC versions</li>
<li>Reliable design</li>
<li>Miniature Size</li>
<li>Easy torque adjustment</li>
<li>CE approved</li>
<li>IP65 Rated</li>
<li>Dimensions: 82mm² x 234mm high (to bottom of paddle)</li>
<li>3/4" BSP Process Connection</li>
<li>Available with 4 different paddle options</li>
<li>Supplied with polycarbonate paddle</li>
</ul> |
Nohken |
R7z.pdf |
1 |
half_width |
Super User |
Hits: 0
|
|
PLC Systems
|
images/products/control_systems/plc.jpg |
<p>We are an officially appointed systems integrator for Rockwell Automation and other PLC manufacturers. Our software engineers undertake regular product training to ensure that development facilities are always kept up to date with the latest products.</p>
<p>We provide Rockwell systems based on CompactLogix™, ControlLogix™, FlexLogix™ or MicroLogix™ hardware and develop software using Rockwell’s RS Logix 5000, RS NetWorx and RS Linx. We also provide solutions using Siemens (Series 7), etc.</p>
<p>PC and PLC Hardware is carefully chosen in consultation with the client to provide a tailor made solution which gives the right balance between cost, capability, future expansion and local field support. We provide centralised or distributed systems according to the demands of the application or the clients preference.</p> |
|
|
1 |
half_width |
Super User |
Hits: 0
|
|
Premier Discharger
|
images/products/tote_systems/discharge_premier.jpg |
<p>TOTE® Discharge Stations are the foundations for bulk contained product transfer from our containers to destination. These units usually feed equipment such as tablet presses, encapsulators, process vessels, granulators and mills. Many options are available for automation, segregation prevention or metered output.</p> |
Tote |
Premier_Line_Discharge_Station.pdf |
1 |
half_width |
Super User |
Hits: 0
|
|
PS-3A Four Column Robot
|
images/products/bagging_palletising/PS-3A-4.jpg |
<p>The PS-3A combines many of the benefits of robotic palletising with the qualities of a conventional layer palletiser. Each layer is compressed from the side and the top to produce neat, square pallets every time. The pallet itself always remains on the roller conveyor and the stripper plate frame indexes upwards with each layer to build the stack.</p>
<ul>
<li>Robust four column frame</li>
<li>Brushless servo motor drives</li>
<li>Rotating Gripper head </li>
<li>Motorised side layer compression for neat, square layers</li>
<li>Top layer compression for better load stability</li>
<li>Empty pallet dispenser</li>
<li>Most maintenance can be done at floor level</li>
</ul>
<p>The PS-3A robot can be used in virtually any applications below 1200 bags/hr. It is particularly suitable for applications where overlapping of the bags is required or where the bags are poorly filled, aerated or highly fluidised.</p>
<p><strong>Options</strong></p>
<ul>
<li>Bag flattener on the infeed conveyor belt</li>
<li>Bottom sheet dispenser</li>
<li>Sheet dispenser from reels</li>
<li>Plastic mesh dispenser between layers</li>
<li>Infeed belt with vertical lift</li>
<li>Teflon™ coated stripper plate for working with PE bags</li>
</ul> |
|
|
1 |
half_width |
Super User |
Hits: 0
|
|
PS-3A Two Column Robot
|
images/products/bagging_palletising/PS-3A-2.jpg |
<p>The PS-3A combines many of the benefits of robotic palletising with the qualities of a conventional layer palletiser. The pallet always remains on the roller conveyor and the stripper plate frame indexes upwards with each layer to build the pallet stack.</p>
<ul>
<li>Robust two column frame</li>
<li>Brushless servo motors</li>
<li>Rotating Gripper head </li>
<li>Fixed side layer compression for neat, square layers</li>
<li>Top layer compression for better load stability</li>
<li>Empty pallet dispenser</li>
</ul>
<p>The PS-3A robot can be used in virtually any applications below 800 bags/hr. It is particularly suitable for applications where overlapping of the bags is required or where the bags are poorly filled, aerated or highly fluidised.</p>
<p><strong>Options</strong></p>
<ul>
<li>Bag flattener on the infeed conveyor belt</li>
<li>Bottom sheet dispenser</li>
<li>Sheet dispenser from reels</li>
<li>Plastic mesh dispenser between layers</li>
<li>Infeed belt with vertical lift</li>
<li>Teflon™ coated stripper plate for working with PE bags</li>
</ul> |
|
|
1 |
half_width |
Super User |
Hits: 0
|
|
PS-4A Single Column Robot
|
images/products/bagging_palletising/PS-4A-1.jpg |
<p>The PS-4A is a single column robot specifically developed for sack palletising applications. It represents the simplest and most compact model in the Concetti range and includes the 3S-C for 200 bags/hr, 6S-C for 360 bags/hr and the 8S-C for 480 bags/hr</p>
<ul>
<li>Robust single rotating column</li>
<li>Brushless servo motor drives</li>
<li>Rotating Gripper head</li>
<li>Palletising from up to two separate lines</li>
<li>Palletising directly on the floor</li>
</ul>
<p>The PS-4A single column robot is ideal for all low speed palletising up to the maximum 480 bags/hr. It is particularly suitable for applications where space is limited or where overlapping of the bags is required or where the bags are poorly filled, aerated or highly fluidised.</p>
<p><strong>Options</strong></p>
<ul>
<li>Bag flattener on the infeed conveyor belt</li>
<li>Empty pallet dispenser</li>
<li>Pallet handling by roller conveyors</li>
<li>Bottom sheet dispenser</li>
<li>Sheet dispenser from reels</li>
</ul>
<p> </p> |
|
|
1 |
half_width |
Super User |
Hits: 0
|
|
PS-AA High Level Layer
|
images/products/bagging_palletising/PS-AA-High-Level-Palletiser.jpg |
<p>The PS-AA High-level infeed layer or pusher palletiser is a high-speed unit for speeds up to 2400 bags/hr. The various operations to orientate, group and deposit the bags are carried out simultaneously which allows these very high capacities to be achieved. An indexing belt carries out row preparation and a twin stripper plate ensures even layer deposit across the pallet.</p>
<ul>
<li>Robust construction</li>
<li>Overhead bag turner</li>
<li>Row preparation by belt</li>
<li>Toothed belt drives for smooth quiet operation</li>
<li>Motorised side layer compression for neat, square layers</li>
<li>Top layer compression for better load stability</li>
<li>Empty pallet dispenser</li>
<li>Operators platform included</li>
</ul>
<p>The PS-AA is designed for stable bags that have a firm, well defined shape and for applications which require high speeds.</p>
<p><strong>Options</strong></p>
<ul>
<li>Bag flattener on the infeed conveyor belt</li>
<li>Bottom sheet dispenser</li>
<li>Sheet dispenser from reels</li>
<li>Teflon™ coated stripper plate for working with PE bags</li>
</ul> |
|
|
1 |
half_width |
Super User |
Hits: 0
|
|
PS-AB Low Level Layer
|
images/products/bagging_palletising/PS-AB-Low-Level-Palletiser.jpg |
<p>The PS-AB Low-level infeed layer or pusher palletiser is intended for applications up to 900 bags/hr. The various operations to orientate, group and deposit the bags are carried out at low level. Row preparation is carried out by belt and a twin stripper plate ensures even layer deposit across the pallet.</p>
<ul>
<li>Robust support structure</li>
<li>Overhead bag turner</li>
<li>Row preparation by belt</li>
<li>Toothed belt drives</li>
<li>Motorised side layer compression for neat, square layers</li>
<li>Top layer compression for better load stability</li>
<li>Empty pallet dispenser</li>
<li>Most maintenance can be done at floor level</li>
<li>The PS-AB is designed for stable bags that have a firm, well defined shape and for applications which require moderate speeds.</li>
</ul>
<p><strong>Options</strong></p>
<ul>
<li>Bag flattener on the infeed conveyor belt</li>
<li>Bottom sheet dispenser</li>
<li>Sheet dispenser from reels</li>
<li>Teflon™ coated stripper plate for working with PE bags</li>
</ul> |
|
|
1 |
half_width |
Super User |
Hits: 0
|
|
Rotating ring, Type A
|
images/products/wrapping_systems/A800-4.jpg |
<p>For very high speed applications Ring machines offer many advantages. The Technowrapp A range has two basic models the A 800 and the A 800-4.</p>
<p>The A 800 is a two column unit for rates up to 100 pallets/hr based on 800 x 1200 and 1000 x 1200 pallets up to 2100mm high.</p>
<p>The four column A 800-4 can wrap up to 130 pallets/hr.</p> |
|
|
1 |
half_width |
Super User |
Hits: 0
|
|
Rotating turntable, Type B
|
images/products/wrapping_systems/B150.jpg |
<p>The B range of rotating arm machines covers three basic models the B150, B170 and B200. These units handle 60, 80 and 100 pallets per hour. Again the standard pallet size is 800 x 1200 and 1000 x 1200. Standard pallet height is 2100mm although other heights can be catered for if required.</p>
<p>Models B150E, B170E and B200E have automatic top sheet dispensers and a reduced output of 45, 60 and 70 pallets/hr.</p>
<p>The pre-stretch carriage allows film stretching up to 300%. The unwinding speed, controlled by a motor installed on the carriage, is inverter-driven and based on load perimeter.</p> |
|
|
1 |
half_width |
Super User |
Hits: 0
|
